Aflow completamente automatico

Una caratteristica fondamentale del plastometro Aflow è il suo elevato livello di automazione - pulizia semplice e compattazione definita con un semplice pulsante, impostazioni continue di carico - Aflow si adatta alle tue esigenze di prova. Il plastometro Aflow è stato sviluppato soprattutto per laboratori che testano un elevato numero di provini, questo si riflette nel design robusto nel funzionamento pratico che lo contraddistinguono. Supporta tutte le normative mondiali incluse ISO 1133 e ASTM D1238. L'Aflow può essere utilizzato per la determinazione dell' indice di fluidità in massa (MFR) e in volume (MVR) secondo i metodi A, B, C e D.

Vantaggi:

Vantaggi i & Caratteristiche

Optimum test sequence - time-saving and operator-friendly

The pneumatic pre-compaction feature allows the polymer to be defined and uniformly pre-compacted at the touch of a button—saving time and effort. For an even faster post-test sequence the remaining material can be expelled from the extrusion barrel with a force of up to 80 kg and the extrusion barrel cleaned with a pneumatic cleaning device- again at the touch of a button.

Flexibility via stepless test load up to 50 kg

Test loads in Aflow can be adjusted steplessly from 0.325 kg to 50 kg. A multi-stage test can be performed effortlessly to Method D purely by means of presets in the software. This allows several tests with different weight stages to be carried out with a single barrel filling.

Range di applicazione

The Aflow is noted for being highly automated: Whether simple cleaning and defined pre-compaction at the press of a button, or infinitely settable test loads, the Aflow adapts to your test tasks. The extrusion plastometer supports all globally common standards and procedures, including ISO 1133, ASTM D1238 to Methods A, B, C and D.

The pneumatic pre-compaction feature allows the polymer to be defined and evenly pre-compacted at the press of a button—saving time and effort. Pre-compaction offers a great degree of operator independence, even if the operator performing the test changes often.

Furthermore, Zwick Roell testing software determines the test results in the automated, field-dependent parameterization, ensuring that the Aflow automatically selects the correct test parameters.

To further accelerate the test procedure after the test, you have the possibility to eject the remaining material from the extrusion barrel with a force of up to 80 kg and then to clean the extrusion barrel with a pneumatic cleaning device at the press of a button.

Space-saving, multi-instrument operation lets you connect up to six Aflow or Mflow extrusion plastometers to a PC. Of course, you can also use the Aflow in standalone mode without a PC.

  • The basic version of the Aflow extrusion plastometer is designed to perform MFR and MVR tests to Methods A, B, C and D. They are performed using an automatic extrudate cutter and scale. Tests can be performed to the following standards:
  • ISO 1133, ASTM D1238, ASTM D3364, JIS K 7210.

Pulizia

Aflow's pneumatic cleaning device enables cleaning and pre-compacting to be performed at a preset pressure. The Clean and Pre-compact option allows variable adjustment of the cleaning and pre-compacting pressure, while a switch on the cleaning unit allows one of the two pressure steps to be selected.

Operating philosophy

The new standardized operating philosophy allows the operator to move easily between instrument and PC and always feel at home.

All test-related settings are grouped logically and are separated from higher-level system settings. The operator is guided through test configuration step by step. The saved test configuration can easily be exported and transferred to other instruments.

Integrated user management allows the operator's input options to be reduced to a minimum. Users see only what is important to them, allowing them to focus on the task at hand right from the start.

The MVR is shown "live" in graphic form in stand-alone mode and in the ZwickRoell testing software. This allows both melting process and behavior to be followed precisely during measurement.

Saving space when testing with multiple instruments

In labs with multiple instruments, testXpert III makes it possible to configure and control up to six Aflow and/or Mflow extrusion plastometers with one PC. Central operation and saving of results at a single workplace increases efficiency and affords a quick overview of all tests currently in progress. For a clear overview of operations, we recommend using two monitors.

The benefits of operating an extrusion plastometer with testXpert III are:

  • Automatic bubble detection that prevents measurement errors caused by air inclusions by detecting them in the plastic melt
  • Live display of the melt volume rate that follows the progress of melting and the behavior during measurement and graphically or numerically displays the test piston speed when the test starts in cm³ per 10 min. or in g per 10 min. when the melt density is preselected

Scorpi i plastometri a estrusione Aflow

4:42

Fully automated Aflow extrusion plastometer

The extrusion plastometer supports all globally common standards and procedures for melt flow testing, including ISO 1133 and ASTM D1238 according to Methods A, B, C and D.

Descrizione tecnica

La versione base del plastometro di Aflow è progettata per eseguire prove MFR e MVR in conformità ai metodi A, B, C e D. Queste prove possono essere eseguite usando una taglierina automatica e una bilancia. Le prove possono essere eseguite in accordo con le seguenti normative: ISO 1133, ASTM D1238, ASTM D3364, JIS K 7210.

Dati tecnici relativi a plastometro Aflow

Basic instruments

Please note:
requires dry, oiled air

Type

Aflow extrusion plastometer (230 V)

Aflow extrusion plastometer (110 V)

Item No.

1043954

1043955

Test load

0.325 to 50 (stepped or stepless)

0.325 to 50 (stepped or stepless)

kg

Compressed air, oiled, dry

5 to 10

5 to 10

bar

Dimensions:

Height

1021

mm

Width

580

mm

Depth

596

mm

Dimensions

Height

1021

mm

Width

580

mm

Depth

596

mm

Approx. weight

114

114

kg

Test temperature

+50 to +450

+50 to +450

°C

Display

capacitive touch display

capacitive touch display

Temperature display resolution

<0.001

<0.001

K

Number of storable parameter sets

> 100

> 100

Interfaces

  • Ethernet port for connecting a PC
  • 2 x USB port for connecting a printer or USB stick
  • RS232 port for exporting raw data, data output: serial number, specimen number, number of extrudates, thickness (user-specified), thickness at test temperature, total weight of extrudates, MFR average value, MVR average value, MFR and MVR individual values
  • RS232 port for connecting an analytical balance (from the ZwickRoell range)

Temperature accuracy in the range of 0 to 75 mm above the die in the temperature range of 50 °C to 450 °C

<0.3[1]

<0.3[1]

K

Time measurement

Error limit (Method A)

± 0.02 (with automatic extrudate cutter)

± 0.02 (with automatic extrudate cutter)

s

Error limit (Method B)

± 0.01

± 0.01

s

Travel measurement

Error limit (Method B)

±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D1238)

±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D1238)

Resolution

<0.0005

<0.0005

mm

Multi-instrument operation on a single PC.

available main memory, min.

1.54

1.54

GB

clock rate

3

3

GHz

connected Aflow plastometers per PC

6

6

Included in delivery:

  • Ethernet cable
  • cleaning accessories (cleaning piston, cleaning brush, cleaning pads (500x)) for barrel
  • test granulate and filling chute for granulate

Power input specifications

Power supply

220 to 240 V, 1L/PE/N

100 to 127 V, 1L/PE/N

Power consumption (full load), approx.

0.6

0.6

kVA

Power frequency

50/60

50/60

Hz

  1. for distance and time, complies with ISO 1133-2

Accessori adatti

Pistone

Piston (1 required)

At least one piston must be selected. It should suit the materials to be tested. If you are testing to ISO 1133-1997, a sharp-edged piston is required.

Test material

Standard

Properties

Item no.

Plastic, fluorine free

ISO 1133

Wear resistant

032298

Plastic, containing fluorine

ISO 1133

Resistant to acid

032299

Plastic, fluorine free

ISO 1133-1997

sharp-edged, Plastic, containing fluorine

032300

Plastic, fluorine free

ASTM D1238

-

1015333

Barra di estrusione

Extrusion barrel (1 required)

An extrusion barrel must be chosen to suit the materials to be tested. Cleaning pads and a cleaning rod are supplied to clean the extrusion barrel.

Test material

Inner diameter
[mm]

Drill hole

Properties

Item no.

Plastic, fluorine free

9.55

Finely honed

Wear resistant

050888

Plastic, containing fluorine

9.55

Finely honed

Resistant to acid

Dispositivo di taglio

Dispositivo di taglio e terminale per orifizio

Il dispositivo di taglio è consigliato per intervalli di taglio maggiori a 1 minuto. Per intervalli di taglio brevi, per ottenere tagli in intervalli di tempo prestabiliti è consigliato l'uso del dispositivo di taglio. previene il deflusso prematuro del materiale quando vengono testati materiali plastici con elevato indice di flusso (> 10 cm3 / 10 min al carico 0.375 kg). Quando il terminale viene usato è necessario utilizzare anche un dispositivo di taglio automatico per l’apertura dello stesso ad inizio prova. 
Top